B&B-Lock A1-HX Fail Secure lock with handle function

(on the inner side of the door)
 

A1-HX backset 35 mm with adjustable striking plate

A1-HX arbeidstroomslot met krukbedieningApplications

Logo BB LocksDoors which has to be secured from the outside,
and permanently unlockable with a handle :
a bank office (self-banking, offices), exchange offices, postoffices , jewelery stores, diamond stores, computer stores and departments, laboratories, industrial buildings, federal ministries etc.

 

Characteristics

  • Symmetrical bolt with anti-saw pin,
       for both bumper doors and revolving (180°) doors.
  • Ejected bolt 20 mm
  • Surface Hardened bolt and lock parts of exceptional strength
  • Unlocking possible under considerable lateral pressure.
  • Extremely strong hardened bolt and locking parts for high resistance.
  • Baseplate as well as cylinder block are 1 piece of solid casted stainless steel.
  • Striker plate (3mm thick) in investment cast stainless steel with fixed striker cup.
  • Mechanical unlocking using a door handle on the secure side,
       or through a profile cylinder is always possible.
       The cylinder also gives an electrical unlocking impulse,
        therefore the lock continues to function in the same way
       as with an electrical unlocking impulse.
  • Both 17mm and 22mm profile cylinders can be used.
  • Different backset sizes available : 30 and 60 mm.
  • Specially developed electromagnet for fast unlocking and very low development of heat.
  • Power supply : 24V = direct current +/- 5% .
  • Consumption : activation current (moment of unlocking) : ca.2,2 A.
                                holding current (permanently unlocked) : ca. 130 mA.
  • Built-in microprocessor controlled printed circuit board,
       protected against wrong polarity and peak voltages.
  • Monitoring of the bolt locking (locked / unlocked) via one signal line
  • Monitoring of the door position (open / closed) via one signal line.
  • Restart : the lock will re-do 3 attempts to close after the first attempt when not properly locked.
  • Connection via removable plugs with screw clamps (wire section 1,5 mm2)
  • B&B Locks Cable (2 x 1,5 mm2 + 3 x 0,22mm2) – Compulsory!

tegenplatenSecurity Escutcheon

To install and use the  B&B-lock A1-HX properly,
you need a specially designed Security Escutcheon.

BB Locks SEH-17 Veiligheidsbeslag

Solid Stainless Steel security fittings SEH-17 for Euro Cylinder.
with operating handle, according to EN179.
through-connected 2 x M8
Equipped with core pulling protection

For Accessories click here . 

 

 

 

Documentation

BB-Locks Datasheet A1-6017-HX
BB-Locks Datasheet A1-3517 HX
BB-Locks Dimensions A1-6017-HX with standard striker plate
BB-Locks Datasheet Security Escutcheon SEH-17

If you have any question or want more info feel free to contact us. 

Order Numbers

Standard Version

Order Numbers Description
A1-BASIC-3517-HX-ST Fail Secure HX with operating handle - Backset 35 mm - European Cylinder 17 mm -
Standard fixed striking plate
A1-BASIC-3517-HX-REG Fail Secure HX with operating handle - Backset 35 mm - European Cylinder 17 mm -
adjustable striking plate
A1-BASIC-6017-HX-ST Fail Secure HX with operating handle - Backset 60 mm - European Cylinder 17 mm -
Standard fixed striking plate
A1-BASIC-6017-HX-REG Fail Secure HX with operating handle - Backset 60mm - European Cylinder 17 mm - 
adjustable striking plate

SRC-E

Order Numbers Description
A1-SRC-2517-SX-ST Fail Secure HX with operating handle - Backset 35 mm - European Cylinder 17 mm -
Standard fixed striking plate - SRC-communication bus
A1-SRC-2517-SX-REG Fail Secure HX with operating handle - Backset 35 mm - European Cylinder 17 mm -
adjustable striking plate - SRC-communication bus
A1-SRC-3017-SX-ST Fail Secure HX with operating handle - Backset 65 mm - European Cylinder 17 mm -
Standard fixed striking plate - SRC-communication bus
A1-SRC-3017-SX-REG Fail Secure HX with operating handle - Backset 60 mm - European Cylinder 17 mm -
adjustable striking plate - SRC-communication bus

Options

Order Numbers Description
SEH-17 Stainless Steel Security Escutcheon with a U-handle and a core pulling protection.
For use with a European Cylinder 17 mm
SEH-22 Stainless Steel Security Escutcheon with a U-handle and a core pulling protection.
For use with Swiss Cylinders 22 mm
REL-1 REL-1 OntdubbelingsprintjeREL-1 fot A1-BASIC locks  Relay-PCB for transition signals
“door opened and “dropbolt is in” to potential free contacts. 
Dimensions (L x B x H): 66 x 26 x 21 mm.