BB-Locks A1-SX Fail Secure Lock

BB-Locks-A1-BASIC-SXApplications

High quality electromechanical safety lock,
type 'A1 SX " operating according to the current principle (= energized locked).
Given a very robust construction (solid cast base plate and Cemented lock parts),
and the fact that the lock is permanently locked if the lap has been ejected,
this lock provides a very high resistance to all kinds of intrusion attempts. 
Applicable Ingen are doors that should be locked permanently: 
banks, exchange offices, post offices, jewelers, diamond business, computer departments,
labs, barracks, prisons, embassies, etc ... even during power outages.

Materials

  • Baseplate : Stainless Steel AISI 304 (precision casting) 10 mm thickness
  • Latch and locking parts : cemented (45 RC) chromium-nickle steel (precision casting)
  • Cylinderblock : Stainless Steel AISI 304 (precision casting)
  • Housing, coverplates and striking plate :

 

 

 

 

 


Characteristics

tegenplaten

  • Symmetrical bolt with anti-saw pin,
    for both bumper doors and revolving (180°) doors.
  • Ejection of the latch 20 mm.
  • Surface Hardened bolt and lock parts of exceptional strength
  • High Latch Resistance (non-desctructable) , sideways as frontal on the latch.
  • The locking parts are mounted on a strong M6-axis,
    which is mounted on a solid base plate (10 mm thickness) from haredened stainless steel.
    As a result, a free movement of the components is guaranteed.
  • Baseplate as well as cylinder block are 1 piece of solid casted stainless steel.
  • Unlocking possible under considerable lateral pressure.
  • Included stainless steel locking plate (3mm thick) with a molded box strike.
  • Mechanical release, by means a cylinder, it is still possible.
    In the control cylinder is also connected an electrical contact,
    so that the lock further functions as with an electrical release.
  • Both 17mm and 22mm cylinders can be used.
  • Different backset sizes available : 25, 30 en 50 mm.
  • Specially developed electromagnet for fast unlocking and very low development of heat.
  • Power supply : 24V= direct current +/-5 % .
  • Power Usage :
      activation current (moment of unlocking) :  ca. 2,2 A.
      holding current (permanently unlocked) : ca. 130 mA.
  • Built-in microprocessor controlled printed circuit board,
    protected against wrong polarity and peak voltages..
  • Monitoring of the boltposition (locked / unlocked) via one monitoring line 
  • Monitoring of the door position (open / closed) via one monitoring line.
  • Restart : the lock will re-do 3 attempts to close after the first attempt when not properly locked.
  • Connection via removable plugs with screw clamps (wire section 1,5 mm2)

Security Escutcheon

SE-17 veiligheidsbeslag
Security Escutcheon SE-17 for Eurocylinder

Documentation

Dimensions A1-SX - Backset 25 mm Standard Striking Plate
Dimensions A1-SX - Backset 25 mm Adjustable Striking Plate
Dimensions A1-SX - Backset 30 mm Standard Striking Plate
Dimensions A1-SX - Backset 30 mm Adjustable Striking Plate
Dimensions A1-SX - Backset 50 mm Standard Striking Plate
Dimensions A1-SX - Backset 50 mm Adjustable Striking Plate

More info or you want prices? Get in touch with us

Order Numbers

Standard Version

Order Numbers Description
A1-BASIC-2517-SX-ST Fail Secure Lock  SX - Backset 25 mm - European Cylinder 17 mm
Standard non-adjustable striking plate
A1-BASIC-2517-SX-REG Fail Secure Lock  SX - Backset 25 mm - European Cylinder 17 mm
Adjustable Striking Plate
A1-BASIC-3017-SX-ST Fail Secure Lock  SX - Backset 30 mm - European Cylinder 17 mm
Standard non-adjustable striking plate
A1-BASIC-3017-SX-REG Fail Secure Lock SX - Backset 30 mm - European Cylinder 17 mm
Adjustable Striking Plate
A1-BASIC-5017-SX-ST Fail Secure Lock SX - Backset 50 mm - European Cylinder 17 mm
Standard non-adjustable striking plate
A1-BASIC-5017-SX-REG Fail Secure Lock SX - Backset 50 mm - European Cylinder 17 mm
Adjustable Striking Plate

SRC-version

Order Numbers Description
A1-SRC-2517-SX-ST Fail Secure Lock SX - Backset 25 mm - European Cylinder 17 mm
Standard non-adjustable striking plateSRC-communication bus
A1-SRC-2517-SX-REG Fail Secure Lock SX - Backset 25 mm - European Cylinder 17 mm
Adjustable Striking Plate - SRC-communication bus
A1-SRC-3017-SX-ST Fail Secure Lock SX - Backset 30 mm - European Cylinder 17 mm
Standard non-adjustable striking plate - SRC-communication bus
A1-SRC-3017-SX-REG Fail Secure Lock SX - Backset 30 mm - European Cylinder 17 mm
Adjustable Striking Plate - SRC-communication bus
A1-SRC-5017-SX-ST Fail Secure Lock SX - Backset 50 mm - European Cylinder 17 mm
Standard non-adjustable striking plate - SRC-communication bus
A1-SRC-5017-SX-REG Fail Secure Lock SX - Backset 50 mm - European Cylinder 17 mm
Adjustable Striking Plate - SRC-communicatiebus

Extra Options

Order Numbers  Description
SE-17 Stainless Steel Security Escutcheon with core drawing protection for European cylinder 17 mm
SE-22 Stainless Steel Security Escutcheon with core drawing protection for Swiss cylinder 22 mm
REL-1

REL-1 ontdubbelingsprint

REL-1 for A1-BASIC locks Relay PCB for transforming the signals “door opened,
and  “swinging bolt is in" to potential free contacts.
Dimensions (L x W x H): 66x26x21 mm.