Accesories B&B-Locks A1 Series

Security Escutcheon for B&B-Locks Swinging Bolt Locks
 

Security Escutcheon B&B-Locks  SE17

BB-Locks SE-17Characteristics

  • Stainless Steel Security Escutcheon for the A1-series protects the cylinder against violence and manipulations.
  • Core Pulling Protection
  • through-connected with 2x M8 screws, thereby it's a one piece with the OC-A1.
  • The plate on the outside is a solid stainless steel plate with a thickness of 16 mm

Dimensions

Front : 103 mm x 37 mm x 16 mm
Back : 98 mm  x 32 mm x 5 mm

Order Numbers

SE17 Security Escutcheon for 17 m cylinder

Documentation

Technical Documentation of the Security Escutcheon SE17

 

 

Security Escutcheon B&B-Locks  SEH17 with handle

BBLocks SEH-17 VeiligheidsbeslagCharacteristics

  • Stainless Steel Security Escutcheon for the A1-series with U-handle
  • The handle on the inside protects the cylinder from violence and manipulations.
  • Core Pulling Protection
  • through-connected with 2x M8 screws, thereby it's a one piece with the OC-A1.
  • The plate on the outside is a solid stainless steel plate with a thickness of 16 mm
  • According to EN179





Dimensions

Front : 149 mm x 37 mm x 16 mm
Back : 149 mm  x 32 mm x 5 mm

Order Number

SEH17 Security Escutcheon with handle for a 17 mm cylinder

Documentation

Technical File of the Security Escutcheon SEH17

Relay PCB from a transistor output to a potential-free contact REL-1

REL1 Printje
Switches the standard contact out of a BB-Lock (connection 4 & 5) to potential-free contacts

 

Characteristics

  • Gives you potential-free contacts to monitor the position of the door (door open / door closed) and position of the bolt
  • Monitoring (bolt in / bolt out)

Dimensions

58 mm x 29 mm x 16 mm (L x B x H) 

Order Number

REL-1 relaisprint

Documentation

Technical Folder REL-1

Wiring Scheme

REL 1 aansluitschema

SRC-1-interface for serial outputs

SRC interfaceSRC-1 ( serial bus connection)
Potential free contacts for monitoring the position of the door, position of the bolt, handle and cylinder operation
Is connected onto monitoring line A-B with the locks from A1-SC series

There is also a variant, SRC-2, for master-slave connection of two B&B-Lock locks in one door,
for the creation of a multi-point lock.

Order Number

SRC-1 interface for serial outputs seriële uitgang

 

Wiring Scheme

SRC Aansluitschema

Cables for  B&B-Locks

 

Technilock B-BA1-BASIC-CABLEB&B Basic Cable
Cable with 2 x ø1,5mm and 3 x ø 0,22mm wires + shielding
Technical Documentation

 

A1-BASIC Connection

A1-SRC Connection

Red Power +24V DC Power +24V DC
Blue GND(0V) GND(0V)
Black Opening impulse (toGND) Opening impulse (toGND)
Brown Signal : Position of the swinging bolt Serial Communicationline
(signal A)
Yellow Signal : Position of the door Serial Communicationline
(signaal B)
It's very important that you send the correct voltage / current to the lock.
Therefore it's necessary to use a cablesection from 1.5mm for the power supply and 0.22 mm for the signals.
Maximum length between the power supply and the lock is 50 m if you connect 1 lock on the PS24 power supply,
or 25 m if  you connect 2 locks on the PS24 Power Supply.

Allocking Housing

SMB1 Opbouwbehuizing

  • Makes it possible to surface mount a BB-Lock.
  • Made from Stainless Steel
  • Dimensions : 39,8 cm x 8 cm x 4 cm

Make sure you always mention the right series of BB-Lock !

Documentation

Technical Details JT203041 & JT203042 Allocking Housing for BB Locks